Lenovo 1996 Скачать руководство пользователя страница 110

Страница: 110 / 136

Actions:

• Verify that all option hardware and cable connections are secure.

• If the option comes with its own test instructions, use those instructions to test the option.

• If the failing option is a SCSI option, verify that:

– The cables for all external SCSI options are connected correctly.

– The last option in each SCSI chain, or the end of the SCSI cable, is terminated correctly.

– All external SCSI options are turned on. External SCSI options must be turned on before the computer

is turned on. For more information, see your SCSI documentation.

• Verify that the option and any required device drivers are installed correctly.

If these actions do not correct the problem, run the diagnostic programs (see “Diagnostic programs” on
page 101 for instructions). If you need technical assistance, see Chapter 11 “Getting information, help, and
service” on page 105.

Performance and lockup problems

Poor performance and lockup problems can be a result of any of the following:

•

“Insufficient free hard disk drive space” on page 98

•

“Excessive number of fragmented files” on page 99

•

“Insufficient memory” on page 99

Make a selection from the above list to find out more about the corrective actions you can take.

Insufficient free hard disk drive space

Symptom: Insufficient free hard disk drive space

The Windows operating system will slow down and might produce errors if the hard disk drive gets too full.

To check the amount of free space on the Windows 7 operating system, do the following:

1. Click

Start

➙

Computer

2. Right-click your C drive entry and then click

Properties

. The amount of free disk space is displayed.

Actions to free up disk space:

•

1. Click

Start

➙

Computer

2. Right-click your C drive entry and then click

Properties

3. Click

Disk Cleanup

4. A list of unnecessary file categories is displayed. Select each file category you want to delete,

and then click

•

1. Click

Start

➙

Control Panel

2. Click

Programs

3. Click

Turn Windows features on or off

4. A list of optional Windows components is displayed. Follow the instructions on the screen.

•

1. Click

Start

➙

Computer

ThinkCentre User Guide

Содержание 1996









































































































































Результаты поиска

Содержание 1996

Отзывы:

Lenovo 1996, Руководство пользователя, Страница: 110 / 136

Результаты поиска

Содержание 1996

Отзывы: