Replacement Parts
Maintenance
PROPER CLEAN-UP TECHNIQUE IN CASE OF
LAMP BREAKAGE
●
Wear protective gloves, eyewear and mask.
●
Sweep the broken glass and debris into a plastic bag,
seal the bag, and dispose of properly. Contact your
local waste management office for proper disposal.
●
Do not use a vacuum cleaner. Do not incinerate
.
Model PCO-12C Exploded View
Model PCO-20C Exploded View
1
2
3
4
5
6
7
8
9
No.
Description
PCO-12C-2 PCO-20C-2
Complete PureAir™ System
75X69
75X61
1
Cabinet
75X72
75X65
2
Assembly
75X70
75X62
3
Access Door
93X39
75X64
4
Electrical Socket
75X77
75X77
5
UVA Lamp
10M35(4)
10M35(6)
6
Lamp Socket
49M00
49M00
7
Ballast
56M12
56M12
8
Titanium dioxide coated metal insert
75X73
75X66
9
MERV 9 pleated filter
75X74
75X67
Power Cord (Not Shown)
49M48
49M48
Contact your local Lennox dealer to order replacement parts.
For the Lennox dealer nearest you, dial 1-800-9-LENNOX.
Visit us at http://www.Lennox.com
7
LAMP DISPOSAL
Hg-LAMP CONTAINS MERCURY.
Manage in accord with disposal laws.
Refer to www.lamprecycle.org or call 1-800-9-LENNOX.
LAMP CHECKOUT (Does not illuminate.)
1. Check power cord for 120V power.
2. Unplug power cord and remove access door.
3. Slide out assembly and remove pleated filter or
metal insert.
4. Check lamps for proper connection in sockets.
5. Exchange non-working lamp with one of the
working lamps. If the new lamp operates nor-
mally, replace defective lamp.
6. If steps 1 through 5 pass inspection then the ballast
may be at fault. Ballast must be replaced with an
approved ballast by a qualified service technician.
Lamps contain Mercury.
Ingestion or contact with mercury or mercury vapor
is hazardous to your health.
Take care when handling lamps. If lamp breaks,
avoid contact with mercury.
CAUTION
