Page 31
Corp. 1244-L9
System Start Up Using Wireless Remote
General Operation
1 -
Press POWER button once to turn system on.
2 -
Press MODE button until desired operating
mode icon is displayed.
NOTE - When AUTO mode is selected, the
temperature setting is not displayed on the
remote control. The - and + buttons cannot be
used to make temperature setting selections.
3 -
Press - or + buttons until desired temperature
setting is displayed.
NOTE - Skip this step in AUTO mode.
4 -
Press FAN button until desired fan speed icon
is displayed.
NOTE - Fan speed will be set to low if
DEHUMIDIFICATION
mode has been selected.
5
- Press OSCILLATE button. Indoor unit
directional louver will open and begin to
oscillate. If a single setting is preferred, press
button again when louver is in the desired
position. Louver will remain in desired position
until system is powered off.
Special Functions
6 -
Press SLEEP button to initiate sleep function.
Then press TIMER OFF button to set timed
off.
7 -
Use TIMER ON and TIMER OFF buttons to
schedule desired timed on and off settings.
8 -
Use LIGHT button to set display light on or off.
9 -
Use BLOW button to turn on and off extended
fan operation feature.
10-
Use TURBO button to turn accelerated fan
speed on or off.
11-
Use I FEEL button to use temperature sensor
in remote control to initiate cooling and heat
ing demands.
1
2
3
4
5
7
8
9
10
6
11
