Page 7
TYPICAL UNIT CONTROL WIRE CONNECTIONS
5
WIRE RUN LENGTH
AWG# INSULATION TYPE
LESS THAN 100’ (30M)
18
TEMPERATURE RATING
MORE THAN 100’ (30M)
16
35°C MINIMUM
A RUN CONTROL WIRES THROUGH RIGHT CUTOUT.
B RUN CONTROL WIRES THROUGH WIRE TIES.
MAKE CONTROL WIRE CONNECTIONS USING FIELD
PROVIDED WIRE NUTS. SEE FIGURE 3 FOR CONNECTION
REQUIREMENTS.
C
D TIGHTEN WIRE TIE TO SECURE 24VDC CONTROL WIRING.
NOTE - FOR PROPER VOLTAGES, SELECT THERMOSTAT WIRE (CONTROL
WIRING) GAUGE PER TABLE ABOVE.
NOTE - WIRE TIE PROVIDES LOW VOLTAGE WIRE STRAIN RELIEF AND
MAINTAINS SEPARATION OF FIELD INSTALLED LOW AND HIGH VOLTAGE
CIRCUITS.
NOTE - DO NOT BUNDLE ANY EXCESS 24VAC CONTROL WIRES INSIDE
CONTROL BOX.
K1
CONTACTOR
CONTROL BOX
ROUTE THROUGH
WIRE TIES
LOW VOLTAGE
CONTROL WIRING
ROUTE EARTH GROUND
THROUGH LEFT CUTOUT
AND CONNECT TO
GROUND LUG.
HIGH VOLTAGE
WIRING
RIGHT CUTOUT
TIGHTEN
WIRE TIES
C
D
A
B
