background image

IDENTIFICATION OF THE UNIT

The 

HH

 air treatment units come with a rating plate, which shows:

- The manufacturer's address

- Supply voltage in "V"

- "CE" marking

- Supply frequency in "Hz"

- Model

-  Number  of  phases,  indicated  with  "Ph"

- Lot number

- Total cooling capacity in "W"

- Date of production

- Sensible cooling capacity in "W"

- Rated absorbed current in "A"

- Heat output.

- Input in "W"

TRANSPORTATION, RECEIVING, HANDLING

The units and their accessories are enclosed in cardboard boxes up to size 50, while the other sizes are palletised.
The packs should be kept intact until positioned in the final place of installation.
Use suitable handling equipment according to the weight of the unit, as provided for by directive 89/391/EEC and
subsequent amendments.
The weight of each single machine is given in this guide (table 2).

Upon receiving the unit, check all the parts for any damage caused in transit. Any damage should be reported to the
carrier  by  affixing  an  accepted  with  reservation  on  the  accompanying  note,  specifying  the  type  of  damage.

In the event of prolonged storage, keep the units protected against dust and far from sources of vibration or heat.

The number of units that may be positioned on one pallet are given in the table (table 1).

SAFETY PROVISIONS

Secure packs during

transportation.

Do not expose to the

elements.

Do not tread on packs.

Protect hands with work gloves

when dismantling the unit.

Work in PAIRS if the

appliance weighs

more than 25 kg.

Tab. 1

MODE

                               HH  1

0

    HH

20

    

HH 

30

HH 

40

           HH 

50

 

HH 

60

         HH 70

Max. number per pallet
Pallet size

Unit overall dim.

mm

650x533x299 1.000x533x299 1.100x533x324 1.339x533x324 1.339x533x374 1.341x853x674 2.028x853x674

N.

10

5

5

5

5

2

2

140x80

120x80

120x80

150x80

150x80

150x100

230x100

N.B.: the units may be stacked up to a maximum of 1.80 m in height

LENNOX 

 CANNOT BE HELD LIABLE FOR DAMAGE DUE TO INCORRECT

HANDLING  OR  LACK  OF  PROTECTION  AGAINST  THE  ELEMENTS.

!

INSTALLATION 

- OPERATING & 

MAINTENANCE

 MANU

A

L

 

Page 

3

 

All manuals and user guides at all-guides.com

Содержание COMFAIR-HH





















Отзывы: