Lennox Comfair HD 1, Инструкция по применению

Страница: 8 / 12

• 6 •
A
A
B
Application Guide • COMFAIR HD-AGU-1107-E
7. Connect the valve to the connecting hoses:
INSTALLATION - HD
8. Fix the bracket for securing the condensate drain hose and the
connecting hoses on the condensate collecting tray:
9. Fix the condensate drain hose with silicone:
INSTALLATION WITH BUILT-IN
VALVES - CONT’D
CAUTION! The condensate collecting tray must be fi xed so that it slopes
gently downward towards the condensate drain outlet:
N.B.:
- Do not bend or damage the enclosed mounting plate
- Comply with the highlighted measurements (previous page)
- The base of the enclosed mounting plate must project by 9-10 mm
from the wall
- The condensate collecting tray must always be fl ush with the wall.
INSTALLATION WITH VALVES
AND OUTER FRAME
Proceed as shown bellow to assemble the mouting plate:
IMPORTANT! It is recommended that wall-mounted water-fi lled fan coils
are installed with ON/OFF devices.
10. Replace the fan coil in its original position.
1. Mark the position on the wall where the fan coil is to be installed,
then apply the mounting plate and fi x it with two screws and
screws anchors in the relative holes.
2. Position the cross rail of the frame (A) on top of the mounting
plate previously fi xed to the wall.
HD1 AND HD2
HD3
N.B. In model 3, the threaded bars are locked onto the MOUNTING PLATE
with nut and check nut.
Fix to the wall
with threaded
bars
Fix to the wall
with screws
Fix to the wall
with screws
3. Fix the extension (B) to the cross rail with the 4 self-tapping
screws provided in the kit:
HD1 AND HD2