Lennox CLIMATIC 40, Руководство пользователя, Страница: 19 / 32

8
A0 A7 A4 0. ºC 3,0 2 ------
A02 0,3 22 0. ºC 5,0 5 ------
A03 0 50 0 30 ------
A04 A R6 0. ºC 4,5 ------ ------
A05 0,3 50 0. ºC ,0 ------ ------
A08
A R6 0. ºC 35 ------ ------
0 20 0. ºC ------
.5 (ANCM)
------
2.5 (ANHM 22E-43E)
3.5 (ANHM 52D-86D)
4.5 (ANHM 2D-52D)
A9 0 20 0. ºC ------
A
A R6 0. ºC 33 ------ ------
0 20 0. ºC ------ 2.5 (ANCM 52D-86D) ------
A3 A7 R6 0. ºC ------ 7 ------
b0 0 N 0 0
b ------ ------ ------ ºC
b2 ------ ------ ------ ºC
b3 ------ ------ ------ ºC
b4 ------ ------ ------ ºC/bar
b5 ------ ------ ------ ºC
b6 ------ ------ ------ ºC
b7 ------ ------ ------ ºC
b8 ------ ------ ------ ºC/bar
b2 ------ ------ ------ ºC
C0 0 999 0 0 0
C02 0 999 20 20 20
C03 0 999 300 300 300
C04 0 999 2 2 2
C05 0 999 0 0 0
C06 0 999 5 5 5
C07 0 999 50 0 0
C08 0 50 4 0 0
C0 0 8000 00
C 0 8000 00
C2 0 8000 00
C3 0 8000 00
C4 0 00 00 0 0 0
C5 0 8000 00
C7 0 50
0 0 0
C8 0 50 0 0
PARAMETERS
PAR.
DESCRIPTION MIN. MAX. VAR. UD.
BY DEFAULT
ECOLEAN AIRCOOLAIR AIRCUBE
Antifreeze and electrical heater
Antifreeze alarm set point.
Antifreeze differential.
By-pass time for antifreeze alarm.
sec.
Antifreeze heater set point.
Antifreeze heater differential.
Auxiliary heater absolute set point (
st
step).
Auxiliary heater relative set point (
st
step).
Auxiliary heater differential.
Auxiliary heater absolute set point (2
st
step).
Auxiliary heater relative set point (
st
step).
Lower discharge air temperature in freecooling.
Probes
Config. of probe to be shown on the display:
0= probe B1. 1= probe B2
2= probe B3. 3= probe B4
4= probe B5. 5= probe B6
6= probe B7. 7= probe B8
8= Set point without compensation.
9= Dynamic set point with possible compensation.
10= Remote ON/OFF digital input status.
11= Terminal DC40 probe.
Probe B.
Probe B2.
Probe B3.
Probe B4
Probe B5.
Probe B6.
Probe B7.
Probe B8.
Probe DC40.
Timming and delays
Min. compressor ON time. sec.
Min. compressor OFF time. sec.
Delay between 2 starts of the same compressor. sec.
Delay between starts of the 2 compressor. sec.
Delay between 2 shut-downs of the 2 compressors. sec.
Delay at start up. sec.
Delay in switching on the compressor after switching on the pump. sec.
Delay in switching off the compressor after switching off the pump
. min.
Compressor timer. hours
Compressor 2 timer. hours
Compressor 3 timer. hours
Compressor 4 timer. hours
Compressor operation timer threshold (0=not used). hours
Evaporator pump timer. hours
Minimum time between 2 pump starts.
min.
Minimum pump/indoor fan ON time. min.