- 11 -
4. HD Display
4.1. Wi-Fi
4.1.1. Router and Internet Connection:
This is for connecting the S30 Control System to the home wireless network. This settings is disabled by de
fault.
D.
From the home screen, go to
menu > settings > wi-fi
E.
Slide the option to
ON
to enable Wi-Fi.
If the Access Point is Visible
A.
Wi-Fi network will show not connected. Press on
not connected
.
B. Select a network
will be displayed listing all detected networks within range. Selected your home network
by pressing on the network name.
DO NOT USE A GUEST OR UNSECURE ACCESS POINT.
C.
Assuming that your network is secure, a password will be requested. Enter your password and press
join
to continue.
NOTE
- If you wish to see the characters you are typing, check show password.
Access Point is Hidden
A.
Slide the option to
ON
to enable Wi-Fi.
B.
Wi-Fi network will show not connected. Press on
not connected
.
C.
Select
other
.
D.
The enter new network information screen will appear. Enter the name of the hidden network.
E. Select Security
. Options are none, WEP, WPA and WPA2.
DO NOT USE A GUEST OR UNSECURE
ACCESS POINT.
F.
Once security type is selected, a password field will appear. Enter the password and press
join
to contin
ue..
NOTE
- If you wish to see the characters you are typing, check show password.
Whether connecting to a visible or hidden network, if successful, the connection icon above both the router
and Internet icon will have a green check mark above each.
✔
✔
4.1.2. Consumer Account Creation from Thermostat and Connection to Server
Reasons to create an account:
S
To enable remote access to the system using a mobile device with the Lennox mobile application installed
while away from home. This will allow remote adjustment for temperature settings and other features.
S
To enable the Smart Away feature discussed later on in this instruction.