background image

EPA  Wood-Burning Fireplaces

P/N  506023-13  REV. C  05/2013

Brentwood LV

MODEL

Brentwood™ LV

This installation manual will enable you to obtain a safe, efficient and 

dependable installation of your fireplace system. Please read and 

understand these instructions before beginning your installation.
Do not alter or modify the fireplace or its components under any circum-

stances.  Any modification or alteration of the fireplace system, including 

but not limited to the fireplace, chimney components and accessories, 

may void the warranty, listings and approvals of this system and could 

result in an unsafe and potentially dangerous installation.
IHP wood-burning fireplaces are designed for use as a supplemental 

heater.   They are not intended for continuous use as a primary heat 

source.

INSTALLATION AND 

OPERATION INSTRUCTIONS

Listed to standards:
ULC-S610 & UL-127
Report No. 3011202
EPA Cert. No. 537

SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE 

     

WARNING

 

Hot! Do not touch!  The glass and 

surfaces of this appliance will be hot 

during operation and will retain heat 

for a while after shutting off the appli-

ance.  Severe burns may result. 

• 

 

Carefully supervise children in the 

same room as appliance.

 

If small children are present in the home, it is 

recommended that this appliance be fitted with 

an adjustable safety gate or barrier screen.

       WARNING

 

The fireplace cannot be operated without a door 

or firescreen.  Consult your dealer to select the 

correct door or firescreen.

 

Important! To assure proper alignment of glass 

doors: Install this fireplace in a square and 

plumb condition, using shims as necessary at 

sides and/or bottom.

 

Install the fireplace only as described in these 

instructions.

PIBRENTLV  REV. 3  05/2013

Fireplace, Also For Use In

Manufactured Homes With Solid Fuel Only.

THIS UNIT REQUIRES THE INSTALLATION OF A 

FINISHING KIT. SEE “PARTS REQUIRED”

SECTION FOR DETAILS

Shown with louver kit installed

Shown with clean face kit installed

A French manual is available upon request. Order P/N 506223-27.

Ce manuel d’installation est disponible en francais, simplement en faire 
la demande. Numéro de la pièce 506223-27.

5/1

0/2

01

3

Содержание BRENTWOOD LV































Отзывы: