Lennox Hearth Products 1003C Скачать руководство пользователя страница 3

Страница: 3 / 32

PAGE 3

TABLE OF CONTENTS

Important Warnings ................................................ 2

Testing/Listing, EPA, Using this Manual.................. 3

Planning Your Installation ..................................... 4-7

Manufactured (Mobile) Home Requirements ...........8

Installation .......................................................... 8-13

Care and Operation .......................................... 14-17

Recommended Fuel ......................................... 17-18

Maintenance ..................................................... 18-20

Troubleshooting ................................................ 21-23

Specifications..........................................................24

Replacement Parts List..................................... 25-27

Optional Accessories ..............................................28

Safety/Listing Label.................................................29

EPA Label ...............................................................30

Ownership Records ...............................................31

TESTING/LISTING

Model 1003C has been tested to UL Standard 1482
and ULC-S627 by OMNI-Test Laboratories Inc.; Bea-
verton, Oregon; Report number #030-S-02-2.

EPA CERTIFICATION

This stove has been tested to rigorous emissions stan-
dard, and has been certified by the Environmental Pro-
tection Agency.

USING THIS MANUAL

Please read and carefully follow all of the instructions

found in this manual. Please pay special attention to the

safety instructions provided in this manual. The Home-

owner’s Care and Operation Instructions included here

will assure you have many years of dependable and

enjoyable service from your appliance.

CONGRATULATIONS ON THE PURCHASE OF

YOUR NEW WOODSTOVE MANUFACTURED BY

LENNOX HEARTH PRODUCTS.

When you purchased your new woodstove, you

joined the ranks of thousands of concerned indi-

viduals whose answer to their home heating needs

reflects their concern for aesthetics, efficiency and

our environment. We extend our continued support

to help you achieve the maximum benefit and en-

joyment available from your new wood stove.

It is our goal at Lennox Hearth Products to provide

you, our valued customer, with an appliance that

will ensure you years of trouble free warmth and

pleasure.

Thank you for selecting a Lennox Hearth Products

stove as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

PACKAGING LIST

This appliance is packaged with an accessory package,
which contains the following:

One - Installation and operation instructions
manual.
One - Warranty.
One - Catalytic combustor temperature probe and

sleeve.

One - Damper Hook

Содержание 1003C

































Результаты поиска

Содержание 1003C

Отзывы:

Похожие инструкции для 1003C

Бренды по названию

Популярные бренды

Lennox Hearth Products 1003C, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 1003C

Отзывы:

Похожие инструкции для 1003C

Бренды по названию

Популярные бренды