Internal
S
peaker
S
ource
S
elect:
The push
button selector switch can select the audio source to play over the
internal speaker. Press the push
button until the Source Selected LED indicates
the source to play over the internal speaker. Source 5 is the paging line and
source 6 is the music line. No LED indicates that neither source will play over
the internal speaker.
Page
O
n/
O
ff
B
utton:
Pressing the Page on/off button enables a page from audio source 6. The status
LED will be on and solid during the page. Pressing the Page on/off button again
stops the page and the Status LED will turn off. This can be used for trouble-
shooting purposes.
Break Tones inputs:
The Break Tones inputs can be used to play one of two break tones.
Closing Break Tones input 1
or dialing 83#
, triggers the first break tone
Closing Break Tones input 2
or dialing 84#
, triggers the second break tone.
Doorbell
The Doorbell input can be used to play one of two doorbell chimes.
Closing Doorbell input 1, triggers the first doorbell chime.
Closing Doorbell input 2, triggers the second doorbell chime.
Message Triggers
The Message Triggers can be used to play one of three pre-recorded messages.
Closing Message Triggers input 1
or dialing 81#
, triggers the first message.
Closing Message Triggers input 2
or dialing 82#
, triggers the second message.
Closing Message
triggers input 3 or pressing * on the phone will stop any playing
message.
Adding a Global MPI-2.
A Global MPI-2 can be added by connecting the Local MPI-2 “To Global” to the
MPI-2 Global “To Local” using an RJ45 cable. A single conductor ground wire is
also required from the MPI-2 Local GND to the MPI-2 Global GND. The Global
MPI-2 adds a second all-call only phone page input and a second all-call MIC
page input to the system. The Global MPI-2 is used to page to multiple buildings
at the same time while the Local MPI-2 allows in-building paging. The
Global
MPI page has top priority over the local MPI.
16