Doorbell
The Doorbell input connector is used to trigger one of two doorbell chimes.
Connect a normally open dry contact to “1” and “C1” for doorbell chime #1 and/
or “2” and “C2” for doorbell chime #2 using 16 AWG wire.
The doorbells are all-call only.
Message Triggers
The Message Triggers input connector is used to trigger one of t
wo
pre-recorded
messages. Connect a normally open dry contact to “1” and “C1” for message #1
and/or “2” and “C2” for message #3 and/or “3” and “C3” for message
stop
using
16 AWG wire. The messages are all-call only
.
Alternatively, using a phone, pick up the handset, wait for the confirmation tone
then dial
81# to play message 1 or
82# to play message 2
*
to stop message
8