Data
The Data connector is used for communicating to the head-end and to the OP.
Connect the “HE” to the head-end “TO OP” connector using an RJ45 cable.
Connect the “OP” to the OP Data In connector using an RJ45 cable.
Break Tones Input
The Break Tones input connector is used to trigger one of two break tones.
Connect a normally open dry contact to “1” and “C1” for break tone #1 and/or
“2” and “C2” for break tone #2 using 16 AWG wire.
The break tones are all-call
only.
Alternatively, using a phone, pick up the handset, wait for the confirmation tone then dial
83# to play break tone 1
84# to play break tone 2
* to stop break tone
1
5
2
6
3
7
4
8
PINS - 568 B
ORANGE|WHITE
ORANGE
GREEN|WHITE
BLUE
BLUE|WHITE
GREEN
BROWN|WHITE
BROWN
1
2
3
4
5
6
7
8
LON A | ILON® DATA NETWORK
LON B | ILON® DATA NETWORK
INITIALIZATION (SEQUENCER)
PAGE (+)
PAGE (-)
INITIALIZATION (SEQUENCER)
MUSIC (+)
MUSIC (-)
7