LENCO PA-325, Инструкция для пользователей, Страница: 10 / 78

Turning the Bluetooth ® sound system on/off
m Set the POWER switch to ON to switch the Bluetooth ®
sound system on.
m Set the POWER switch to OFF to switch the Bluetooth
®
sound system off.
Establishing a Bluetooth
®
connection
1. Switch the Bluetooth
®
sound system on.
2. Press and hold the BT button for approx. 3 seconds. A short melody will sound followed
by 2 short beeps.
3. Release the BT button.
4. Switch on your mobile device.
5. Activate the Bluetooth
®
function on your mobile device.
6. Start the device scan on your mobile device.
7. Select Lenco PA-325 from the list and connect the devices.
Once the devices are connected with each other, a short melody will sound. The Bluetooth ®
indicator light lights up.
• If you switch the Bluetooth
®
sound system off for a while, it will automatically
connect with the device connected before when it is switched back on again.
If not, you need to press and hold the
BT button for approx. 1 second (short
melody will sound) to have it reconnect with the Bluetooth
®
device.
The Bluetooth
®
device must be placed nearby, switched on and Bluetooth
®
must be activated. Once the Bluetooth
®
device has been connected, two
short beeps will sound.
• If you connect a device to the AUX INPUT connection socket, it will be the
preferred connection for playback. The transmission from the Bluetooth ®
device will be paused. The transmission from the Bluetooth ® device will not
resume until you remove the plug from the AUX INPUT connection socket.
Disconnecting a Bluetooth
®
connection
There can only be one device connected to the Bluetooth
®
sound system via Bluetooth
®
at
any time.
If you would like to pair another device, you must first end the existing connection by...
... switching off the Bluetooth ® function on your mobile device or
... keeping the Bluetooth ® button BT pressed for approx. 3 seconds. A short melody will
sound.
Reset
Electromagnetic interference around the device could lead to malfunctions. If the device
does not connect, proceed as follows:
1. Move the device away from the electromagnetic interference.
2. Switch the Bluetooth ® sound system off ( POWER switch is set to OFF ).