In addition, brief help is available to you on your navigation system. You will reach
it by means of the Options/Destination Entry button and by selecting the help function.
Note:
The GPS-receiver will require some minutes for initialization when deployed
for the first time. Even when GPs signal reception is indicated the navigation could
be imprecise. In all future instances it will take about 30-60 seconds until a correct
GPS-signal is available, sufficient “sight” of the satellite is a prerequisite.
Software Installation On Your PC
In order to be able to deploy self-defined cards on your navigation system you must
install the corresponding navigation software on your PC.
1. Before installing the navigation software ensure that ActiveSync is installed and
your navigation system is connected with your PC via the ActiveSync-cable.
2.Place the CD 1 with the navigation software in your CD drive . The installation will
start automatically.
3. Follow the program instructions. Contents of The Navigation CDs It is possible for
several CDs to be contained in the scope of the delivery according to the version.
Content of the CDs:
CD 1 contains the PC application, digitalized card material and the data material for
restoring the content of the memory card fast. . The PC application will be installed
on the computer and used to set up your own card details. Apart from this, it will
support the recreation of data on the memory card.
Installing Microsoft ActiveSync
In order to transfer your data between your PC and your navigation system you need
the Microsoft ActiveSync program.
Attention:
Important files can be overwritten or changed during the installation of
software. You should create a hard disk backup, in order to be able to have access
to the original files in the case of possible problems following the installation. You
musthave administrator rights to install the software under Windows 2000/XP.
Attention:
You should not connect the navigation system to your computer yet.1. Insert
the Companion CD and wait until the program starts automatically.
Note:
The Auto Run function is probably deactivated if it does not function. The Setup
program on the CD must be started, to start installation manually.
2. Click then Install ActiveSync and follows the instructions onthe screen.
3. Connect the navigation system to your computer with the ActiveSyncCable, while
the connection options are checked. To do this, push the USB connector into a free
USB port on your computer. The hardware installation assistant recognizes now a
new appliance and installs a suitable driver which can take some minutes.Repeat
the die connection search if it fails the first time.
4. Follow the instructions on the screen. The program will now set up a partnership
between your PC and the device.
14
GPS (Global Positioning System)
If at any time in the future you should need to dispose of this product
please note that: Waste electrical products should not be disposed
of with household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice. (Waste
Electrical and Electronic Equipment Directive)
NAV-600 Operation manual
Содержание NAV-600
Страница 1: ...NAV 600 OPERATION MANUAL ...