LENCO LED-3901-4K, Инструкция по установке и эксплуатации

Страница: 12 / 44

EN 12
CUSTOMIZING TV SETTINGS
Initial Setup
• Connect one end of the RF coaxial cable (not included) to the aerial socket on the
wall and the other end of the cable to the RF (75) socket at the rear right bottom
view of your TV.
• Connect the mains cable to the mains socket after you have completed all the
connections.
• In standby mode, press the button on the front right side panel of the TV or the
button on the remote control to turn the TV on. The red LED indicator will turn
blue.
• The first time you turn the TV on, press the buttons to select your desired
mode setting.
• Press the buttons to navigate the menu and change the settings.
General Operation
EXIT OK
First Time Installation
Home Mode
Store Mode
Move Select
Quit