Page 2 of 4
©2003 LeMond
®
Fitness Inc. LeMond, RevMaster, and LeMond Fitness Inc. are registered trademarks.
3. Left Pedal:
The left pedal has a reverse thread pattern
(turn
left to tighten, turn right to loosen). Use your fingers
to start the pedal, so that you can feel if you start to
cross thread the crank arm. Tighten the pedal with a
pedal wrench.
B. Do not switch the seat post and handlebar post
4. The handlebar post is the post that has a smooth finish on top. Insert the handlebar
post into the handlebar tube. Loosely thread a handle without a washer into the main
frame. Raise the handlebar post to the desired height and tighten the handle to
secure the handlebar post.
5. The seat post is the post that has a rough finish on top. Insert the seat post into the
seat post tube. Loosely thread a handle without a washer into the main frame.
Raise the seat post to the desired height and tighten the handle to secure the seat
post.
6.
The handles are spring loaded. Once tightened, ensure that the handle does not
stick out to the side from the main frame. Pull down on the handle and rotate it such
that it does not stick out. Release the handle and lock it into place.
Note:
If the seat/handlebar post does not insert all the way into the frame tube,
use your fingers in the frame tube to push the v-plunger out of the way.
C. Ensure that the water bottle cage is secured to the handlebar
7. Position the handlebar over the handlebar post.
Loosely thread a handle with a washer through the
handlebar post into the handlebar. Slide the
handlebar to the desired position and tighten the
handle.
8. Secure the water bottle cage to the water bottle cage
mount with the 3-mm screw.
Handlebar Post
Seat Post
TIGHTEN
