LEMKEN Rubin 9 U + K U, Руководство по эксплуатации

Страница: 69 / 104

Adjustments
67
The working depth of the implement can
be adjusted by approx. 3 to 14 cm. This is
done using the guide pins (1).

Raise the implement using the three-
point hydraulics on the tractor.

Release the lower guide pins (1) by re-
moving the linch pins.

Insert the lower guide pin (1) in a hole in
the adjusting plates (2) corresponding to
the desired working depth.

Hole 1 => Lowest working depth

Hole 12 => Highest working depth

Insert the implement in the ground.
When the working depth is reached, the
load on the upper guide pins (3) is re-
lieved.

Insert the upper guide pins (3) directly
above the carrier (4) so that the weight
of the rollers provides additional support
for the implement's intake behaviour.
Raising the implement increases the
clearance between the rollers and the
ground.

Secure the guide pins by inserting the
linch pins.
1
2
3 4