LEMKEN Rubin 9 U + K U Скачать руководство пользователя страница 32

Страница: 32 / 104

Safety measures and precautions

3.10

Obligation of the operator



Before switching on the device, read the operating instructions.



Follow the safety instructions!



Wear appropriate protective clothing when carrying out any work on the device.

Protective clothing must be tight-fitting!



Observe generally accepted and other obligatory regulations for the prevention

of accidents and protection of the environment and add them to the operating
instructions!

The operating instructions are an important component of the device.



Ensure that the operating instructions are always ready available at the installa-

tion location of the device and are kept for the entire service life of the device.



If the device is sold or the operating company changes, pass on the operating

instructions with the device!



Keep all safety instructions and danger warnings on the device in a completely

legible state. The affixed safety and warning signs provide important information
on safe operation. Comply with them to ensure your safety!



Do not alter, retrofit or modify the device, potentially impairing safety, without

the approval of the manufacturer. The manufacturer is not liable for any damage
resulting from arbitrary modifications to the device!



Operate the device only in compliance with all connection and default values

provided by the manufacturer!



Use original spare parts only!

Содержание Rubin 9 U + K U









































































































Результаты поиска

Содержание Rubin 9 U + K U

Отзывы:

Похожие инструкции для Rubin 9 U + K U

Бренды по названию

Популярные бренды

LEMKEN Rubin 9 U + K U, Руководство по эксплуатации

Результаты поиска

Содержание Rubin 9 U + K U

Отзывы:

Похожие инструкции для Rubin 9 U + K U

Бренды по названию

Популярные бренды