By default, all stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, select
Menu >Audio setting > FM weak reception: Listen in mono only > Yes.
8 AUX mode
Aux in mode plays audio from an external source such as an MP3 player.
To play audio with Aux in mode,
1).Connect the external audio source to the Aux In (RCA) stereo socket.
2). Either press Mode until the display shows AUX in or select Menu> Main menu >
AUX in.
3). Adjust the volume of MSY5 (and, if necessary, the audio source device) as required.
9. Bluetooth mode
Prior to pairing, verify your device supports Bluetooth 4.0+EDR A2DP and your device
is not connected to any other Bluetooth product. Devices may pair differently. Below is a
general guide.
1. Press to source to Bluetooth mode. This will power on the Bluetooth. Turn the volume
up about ¼ to start. Also turn up the volume on the source device (the device you are
streaming from).
2. Turn on the Bluetooth on your enabled device.
3. Select Bluetooth device name “LEMEGA MSY5” when it appears on your device’s
screen to initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your
device.
You should not have to pair your device again.
Depending on your device, you may need to make multiple attempts at Pairing and/or
Connecting to the “LEMEGA MSY5”, but please give your device adequate time to Pair
or Connect before repeating the process.
25
