LELY HIBISCUS 1015 Profi, Руководство оператора

Страница: 12 / 24

E-10
3 TRANSPORT
After the machine has been adjusted to the transport position, it can
be transported by the tractor. Transport width amounts to 3.0 m.
Put the machine into the transport position as follows:
- To reduce the transport height of the HIBISCUS rake to 3.90 m,
the 5 outer tine arms of each rotor can be demounted and stored
in the holder fitted to the back of the machine.
- Fold up the protection brackets and secure them by means of the
locking pins (fig. 4).
- Operate the single acting tractor valve to put the machine in the
headland position.
- Pull the control cord of the hydraulic system or press the button
on the control box and operate the tractor's double acting valve.
The machine will now fold up and the rotors will sink into the
supports (fig. 5).
- Use all such lighting and warning signals as are mandatory by
law (or other regulations prescribed by the authorities).
- For transport on public roads: make sure that the front axle
weight is sufficient (fit front weights, if necessary) and that the
rear axle weight allowed as a maximum is not needed.
The machine is now ready for transport.
Never allow the PTO shaft to rotate when the machine is in the
transport position.
4
5
!