LELY COSMIX S, Руководство пользователя, Страница: 68 / 102

5-24 Installation
D-I011.1106EN
innovators in agriculture
CAUTION
The inside of the metal shield is c overed with a isolated film (mostly blue
c olored). If the metal shield is turned ba c k, the c able c annot make a ground
c onne c tion with the c onne c tor.
6. Remove the plastic shield from the cable (5).
7. Splice the wires (6) and (7).
8. Sort the wires by color according to one of the tables.
Note:
A Type 1 Network Connector can be configured accordingly a Type A or Type
B wiring scheme. Use the same scheme (A or B) on both cable ends.
T-568A T-568B
1 Green/White 1 1 Orange/White 1
2 Green 2 2 Orange 2
3 Orange/White 3 3 Green/White 3
4 Blue 4 4 Blue 4
5 Blue/White 5 5 Blue/White 5
6 Orange 6 6 Green 6
7 Brown/White 7 7 Brown/White 7
8 Brown 8 8 Brown 8
9. Cut the wires to a length of 1.3 cm (0.51 in) (9).
10. Put the wires and the cable fully in the RJ-45 plug (10).
11. Make sure the wire is on the left or right side of the plug (11).
12. Put the plug in the crimp tool until it clicks (12).
13. Squeeze the crimp tool until it clicks (13).
14. Push the plug tab and remove the plug from the crimp tool (14).
15. Remove the shielding and the wire (15).
16. Repeat the installation procedure for the other side of the network
cable.