LELY WELGER V 160, Руководство по эксплуатации, Страница: 16 / 80

8 WELGER • V 160
•
Never climb onto the drawbar (drawbar head, hitch) or any
other parts of the machine while the machine is in operation.
Keep sufficient distance to the machine (pick-up, running
gear, bale unloading area).
•
Before threading the tying material: stop machine, switch-off
power take-off shaft and tractor motor, take out ignition key
and wait for standstill of the machine. Make the control
powerless (disconnect electrical connection to the tractor).
•
All protection devices must be attached to the machine and
must be in correct state. Before opening the protections:
switch-off power take-off shaft and tractor engine and wait
for standstill of the machine.
•
Block the wheels of the machine with wheel chocks when
the machine is parked. Carry the chocks on the machine
when transporting it or during field use.
•
When opening the tail gate keep a minimum distance of 2 m
from electrical high-voltage lines.
•
There is danger of injury by cutting during work on the net
knife. Wear protective gloves.
•
Maintenance work may be carried out by trained persons
only. All maintenance- and repair works that are not part of
this operating instruction must be carried out by authorised
personnel only.
•
Prior to disassembling the complete pick-up the machine
must be secured against backward tilt.
•
In case of locations on a slope: place the round bales always
so that they cannot move automatically.