MANUAL LEKKER BIKES / Amsterdam M2 series
11
MANUAL LEKKER BIKES / Amsterdam M2 Series
12
CHAPTER 3
Front wheel and fender
fitment
11. Lift
the wheel off the ground and
spin it
, It should spin
freely without noise, if you hear a metallic rubbing sound
then the brakes will need adjusting. You will need a
5mm
allen key
. With the bike upside down, adjust the caliper. You
will need to loosen the
two 5mm allen key bolts
found on
the top of the caliper only a little so that you can gently move
the caliper horizontally so the disc rotor moves freely
between the brake pads. Ensure you
do not leave
any
grease on the disk.
12. ATTENTION:
Disc brakes can be
dangerous
if adjusted
whilst the wheel is spinning, so take extra care when doing
this, If you do not feel comfortable adjusting the brakes, we
recommend to always take your bicycle to a
trained
mechanic
for building/adjustment.
PLEASE NOTE;
Disc brakes are subjected to high
temperatures and stresses, which can cause the disc rotor to
warp slightly,
this is normal and can be adjusted by bending
the disc rotor back to its original position.
IMAGES
Chapter 3
7
7.1
7.2
7.3