MANUAL LEKKER BIKES / Amsterdam M2 Series
19
MANUAL LEKKER BIKES / Amsterdam M2 Series
20
CHAPTER 5
CHAPTER 5
Adjusting gears and final checks
Adjusting gears and final checks
Turn
the adjuster
away
from you to tighten, and towards you
to loosen the cable, we recommend
only
turning
¼ turn
then
checking the alignment, and re-adjust if needed.
Shift
down
a gear, then back to
4th to check the two lines
,
once they are
lined up,
the gears will be correctly adjusted!
Ensure that you can move the gear shifter to its
full
extent
in both directions. To do this you may need to
spin
the rear wheel to allow it to move more, as you can
only move the shifter a little whilst the wheel is
stationary.
To check the movement, locate the
small silver block
with cables attached on the gear changer at the back
wheel, and then
turn
the grip shifter so that the silver
block touches both sides of where the cables are
fitted
to the changer.
For further information on the Nuvinci system please
refer to the
user manual
which can be found
online
, or
contact us directly.
16.2
16.3
16.4
Nuvinci gearing
