The Cla
ss Of
MANUAL LEKKER BIKES / Amsterdam M2 Series
9
MANUAL LEKKER BIKES / Amsterdam M2 Series
10
IMAGES
CHAPTER 3
Front wheel and fender fitment
7
. If you wish to
fit
the
front fender
, you may now do so.
Remove
the silver bolt from the top of the fork and loosely
tighten
it in place with the fender.
Place
the stays in the
mounts on the sides of the fork.
Chapter 2
6.2
6.1
6.2
8.
Now it’s time to
fit
the
front wheel.
Lift the front end of the
bike up,
place the axle
of the wheel in the dropouts, and
carefully align the
brake disc
in the caliper between the
pads. On
both sides
of the wheel, place the washer on the
axle on the outside of the fork, followed by the axle nut. Now
tighten using the
15mm spanner,
ensuring a secure fit.
6
9.
Now with the wheel in place, you can
align and tighten
the fenders. Ensuring there is adequate space between the
tyre and the fender,
tighten
the stay clamps. With one side
securely fastened, check the other side for
alignment.
10.
Push the fender up to make sure there is
even space
between the tyre and fender. Using two 5mm allen keys,
tighten the top
silver bolt.
To help align the front of the
fender, use one key on the back of the fork while pushing the
fender into
alignment.
