LEITZ PH4, Руководство по эксплуатации

Страница: 5 / 38

5
Troubleshooting
•
Blisters or wrinkles on the print: Laminated item too
thin. Insert pouch containing the item between a folded
sheet of unused copying paper and try again (figures A
and B ).
•
White or cloudy patches:
a) Pouch and/or laminated item too thick. Check whether
suitable pouches/materials have been used (see
specifications).
b) Not enough heat. Wait until the READY indicator
appears. If you have laminated continuously for some
time: Wait 15–20 seconds and try again.
•
Patches in margin:
a) Document too thick to be laminated.
b) Pouch too thick. Check whether correct pouch
thickness has been used (see specifications).
•
Pouch stuck in machine during lamination: Do NOT
try to pull out the pouch as this will destroy the motor.
Return the machine to your dealer for repair.
Maintenance
In order to remove superfluous adhesive from inside the
unit, clean the rollers regularly as described here:
•
Set power switch to ON. Wait until the READY indicator
appears.
•
Fold a sheet of unused copying paper once in the middle.
Insert the supplied roller cleaning sheet into the folded
paper (figure
A
).
•
Insert the paper with the folded side first into the inlet
3–5 times (figure B ).
To clean the housing:
•
Unplug the machine. Wipe with a soft cloth and a
general-purpose household cleaner.
3 year guarantee
To be returned with the unit if defective.
LEITZ units are sold with a 3 year guarantee. The conditions
of the guarantee period of 3 years are as follows:
1. Each unit is guaranteed against all defects in material
and/or workmanship for a period of 3 years from the date
of purchase.
2. No unit will be accepted without written notification from
the customer giving details of the problem that has
occurred, and proof of the date of purchase.
3. All units for repair are to be returned to Esselte with
adequate packaging. No liability will be accepted by
Esselte for goods damaged in transit from the customer,
due to inadequate attention to packaging.
4. The supplier will be responsible for all parts and labour
charges as necessary to the unit. The 3 year guarantee is
subject to the following conditions:
a) That the unit has been used strictly in accordance with
the operating instructions supplied with the unit.
b) That if the benefit of this guarantee is sought, the unit
must be returned, carriage paid to Esselte. Esselte
does not accept responsibility for loss or damage in
transit.
c) That the guarantee is invalid if the defects are found to
be caused by accident, misuse, alteration or neglect.
d) That no liability of Esselte is to be implied here for
damage, loss or expense of any kind resulting from,
consequence upon, or in any way due to any fault
whatsoever in the instrument or its accessories.
e) That this guarantee does not affect you statutory
rights as a consumer.
Date of Purchase:
Model No. Serial No.:
Company Name:
Contact person:
Address:
Telephone/Fax No:
Specifications
Pre-heat time 10–15 min
Recommended pouch thickness 75–125 mic (3–5 mil)
Max. thickness of laminated item 0.6 mm
Max. working width 112 mm
Mains voltage 230/240 V AC
Power consumption 70 W
Net weight 0.7 kg
Dimensions (H x W x D) 95 x 210 x 100 mm
Enclosure material ABS
Subject to technical changes without prior notice.
ESSELTE U.K. Ltd Esselte Leitz GmbH & Co KG
Waterside House, Cowley Business Park Export
High Street, Cowley Siemensstrasse 64
Uxbridge UB8 2HP 70469 Stuttgart
ENGLAND GERMANY
Tel: 020 8282 1000 Tel: +49 711 8103-0
Fax: 020 8844 1869