LEITZ PH12, Руководство по эксплуатации

Страница: 5 / 38

5
Troubleshooting
•
Blisters or wrinkles on the print: Too much heat.
Reduce temperature and let machine cool down for
approx. 10 minutes.
•
White or cloudy patches:
a) Not enough heat. Increase temperature. Wait until
READY indicator lights and try again.
b) Pouch and/or laminated item too thick. Check whether
suitable pouches/materials have been used (see
specifications).
•
Patches in margin:
a) Document too thick to be laminated.
b) Pouch too thick. Check whether correct pouch
thickness has been used (see specifications).
•
Pouch stuck in machine during lamination: Press
the Release button and pull out the pouch immediately
(figure
A
).
Maintenance
In order to remove superfluous adhesive from inside the
machine, clean the rollers regularly as described here:
•
Set power switch to ON. Wait until the READY indicator
lights.
•
Fold a sheet of unused copying paper once in the middle.
Insert the supplied roller cleaning sheet into the folded
paper (figure B ).
•
Insert the paper with the folded side first into the inlet
3–5 times (figure
C
).
To clean the housing:
•
Unplug the machine. Wipe with a soft cloth and a
general-purpose household cleaner.
3 year guarantee
To be returned with the unit if defective.
LEITZ units are sold with a 3 year guarantee. The conditions
of the guarantee period of 3 years are as follows:
1. Each unit is guaranteed against all defects in material
and/or workmanship for a period of 3 years from the date
of purchase.
2. No unit will be accepted without written notification from
the customer giving details of the problem that has
occurred, and proof of the date of purchase.
3. All units for repair are to be returned to Esselte with
adequate packaging. No liability will be accepted by
Esselte for goods damaged in transit from the customer,
due to inadequate attention to packaging.
4. The supplier will be responsible for all parts and labour
charges as necessary to the unit. The 3 year guarantee is
subject to the following conditions:
a) That the unit has been used strictly in accordance with
the operating instructions supplied with the unit.
b) That if the benefit of this guarantee is sought, the unit
must be returned, carriage paid to Esselte. Esselte
does not accept responsibility for loss or damage in
transit.
c) That the guarantee is invalid if the defects are found to
be caused by accident, misuse, alteration or neglect.
d) That no liability of Esselte is to be implied here for
damage, loss or expense of any kind resulting from,
consequence upon, or in any way due to any fault
whatsoever in the instrument or its accessories.
e) That this guarantee does not affect you statutory
rights as a consumer.
Date of Purchase:
Model No. Serial No.:
Company Name:
Contact person:
Address:
Telephone/Fax No:
Specifications
Working mode 2-roller, carrierless
Heating system Heated rollers
Max. throughput speed, PH9/12 295/255 mm/min
Pre-heat time <5 min.
Recommended pouch thickness 75–150 mic (3–5 mil)
Max. thickness of laminated item 1 mm
Max. working width, PH9/12 230 mm / 320 mm
Mains voltage 230/240 V AC
Power consumption, PH9/12 285 W / 435 W
Net weight, PH9/12 1.9 kg / 2.4 kg
Dimensions (H x W x D),
PH9
PH12
118 x 365 x 161 mm
116 x 462 x 166 mm
Enclosure material ABS
Subject to technical changes without prior notice.
ESSELTE U.K. Ltd Esselte Leitz GmbH & Co KG
Waterside House, Cowley Business Park Export
High Street, Cowley Siemensstrasse 64
Uxbridge UB8 2HP 70469 Stuttgart
ENGLAND GERMANY
Tel: 020 8282 1000 Tel: +49 711 8103-0
Fax: 020 8844 1869