▼
READ BEFORE INSTALLING ACTIVE CARGO SYSTEM
▼
1.
there are 2 different uprights clearly marked A & B. The A bracket is used on the passenger
side by the cab and on the drivers side by the tailgate. the B upright is used by the drivers
side cab and passengers side tailgate. Keep this in mind when assembling the ACS.
2. Don’t over-tighten bolts. All 10mm bolts = (40lb-ft) All 8mm bolts = (16ft-lb) All 6mm bolts = 10ft-lb) Rail clamp bolts {10ft-lb}
3.
Note: drop in plastic bed liners will need to be removed before installing Active cargo system.
4. Lay down a large area of carpet or blankets as a work area to avoid scratching parts during assembly.
5. Two extra rivet nuts are included in case you make a mistake during assembly.
6. Take your time to do it right, measure twice, drill once.
`
7. Although the Active Cargo System is light having a friend to help is recommended.
▼
ASSEMBLY OVERVIEW
▼
LEITNERDESIGNS.COM | [email protected] | 949-395-3049
V1 | Page 3
TAILGATE
drivers side rail
tacoma down tube
load BAR 60”
TOP BAR
“B” UPRIGHT
“A” UPRIGHT
STATIONARY load
BAR BRACKET
load BAR 60”
passenger side rail
“A” UPRIGHT
“B” UPRIGHT
tacoma down tube
SLIDING load
BAR BRACKET
TOP BAR
STATIONARY load BAR BRACKET
SLIDING load
BAR BRACKET
