V1 | Page 12
ASSEMBLE passenger side:
overview
•
in the next few steps you will assemble the passenger side portion of the active cargo system.
• The illustration bellow shows what the part will look like when fully assembled. You can refer back to this
illustration at any time to clarify part location.
STOP
PLEASE READ!!
THE TWO (2) M8 T-BOLTS NEED TO BE SLIDE INTO THE UPPER MOST T-TRACK BEFORE ASSEMBLING THE
UPRIGHTS. IF YOU FORGET THIS STEP YOU WILL NOT BE ABLE TO INSTALL THE SLIDING LOAD BAR BRACKETS
ON PAGE 22!! WE WILL REMIND YOU TO DO THIS AGAIN SO DONT MESS THIS UP.
“A” UPRIGHT
“B” UPRIGHT
TOP BAR
RAIL
STATIONARY CROSS BAR BRACKET
M8 T-BOLTS
m8 t-bolt
