Leitch ADA-6081 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 42

background image

ADA-6081 User Manual

v

Preface

Unpacking/Shipping Information

This product has been carefully inspected, tested and calibrated before
shipment to ensure years of stable and troublefree service. Please check
the equipment for any visible damage which may have occurred during
transit.

Please confirm that all items listed on the packing list have been
received. If any item on the packing list is missing, please contact your
Leitch dealer. If any item is damaged please contact the carrier. Ensure
that all packaging material is removed from the product and its
associated components before installing the unit.

It is suggested that you keep at least one set of original Leitch packaging,
in the event that a product needs to be returned for service. If the
original packaging is not available, you can purchase replacement
packaging from Leitch at a modest cost or supply your own packaging as
long as it meets the following criteria:

• Packaging must be able to withstand the product weight.

• Product must be held rigid within the packaging.

• There must be at least two inches of space between the product and

the container.

• The corners of the product must be protected.

Products that are being returned to Leitch for servicing should be
shipped prepaid in the original packaging material if possible. If the
product is still within the warranty period, the product will be returned
by prepaid shipment after servicing.

Installation Information

If this product is rack-mountable, it should be mounted in an
appropriate rack using the rack mounting positions and rear support
guides provided. It is recommended that each frame be connected to a
separate electrical circuit for protection against circuit overloading. If
this product relies on forced air cooling, it is recommended that all
obstructions to the air flow be removed prior to installing the frame in
the rack.

If this product has a provision for external earth grounding, it is
recommended that the frame be grounded to earth via the protective
earth ground on the rear panel.

«
...
7
8
9
10
11
...
»

Содержание ADA-6081











































Отзывы:

Нет отзывов

Похожие инструкции для ADA-6081

Бренд: NAD Страницы: 70

Бренд: Alpha Страницы: 4

Бренд: Crown Страницы: 1

CP-Series Power Amps CP1800

Бренд: Electro-Voice Страницы: 36

Бренд: Rocktron Страницы: 16

Бренд: Camco Страницы: 32

Бренд: SAL Страницы: 25

Бренд: JBL Страницы: 8

Бренд: NAD Страницы: 33

Бренд: Art Страницы: 25

Бренд: TRU Audio Страницы: 4

Бренд: VINCENT Страницы: 61

Бренд: Decware Страницы: 18

SkewCat-X cable

Бренд: Inter-m Страницы: 2

Бренд: Martin Audio Страницы: 42

Бренд: Cicognani Страницы: 19

Бренд: Rompa Страницы: 4

Бренд: Sansui Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды