Leitch 880 Series Скачать руководство пользователя страница 93

Страница: 93 / 94

Trademarks and Copyright

AgileVision, BO/S, Broadcast Operating System, CCS,

Command Control System, CCS CoPilot, CCS Navigator,

CCS Pilot, DigiBus, DigiPeek, Digital Glue, DigiWorks, DPS,

DTV Glue, EventWORKS, EZ HD, Genesis, HDTV Glue,

Innovision, ISIS, JUNO, LeFont, Leitch, LogoMotion, MediaFile,

MediaPort, MIX BOX, Monarch, NEO, the NEO design, OPUS,

PanelMapper, Portal, PROM-Slide, RouterMapper, RouterWorks,

StillFile, Still Net, SuiteView, Tekniche, Unilock, VIA,

ViewGuard, Whiplash2, Xplus, and Leitch XPRESS are

trademarks of Leitch Technology Corporation which may be

registered in the United States, Canada, and/or other countries.

All other trademarks are the property of their respective owners.

rights reserved.

This publication supersedes all previous releases. Printed in

Canada.

Warranty

Leitch Technology International Inc. warrants its products against

defects in materials and workmanship for a period of two years

from date of shipment. Leitch, at its option, will repair or replace

products that prove defective during the warranty period, provided

they are returned, freight prepaid, to Leitch. Other products Leitch

sells that are produced by a third party will carry the original

manufacturer’s warranty. Leitch will continue to support these

items with parts and service after the expiration of that warranty.

This warranty shall not apply to any defect, failure or damage

caused by abuse, misuse, improper use, negligence, accident,

modification, alteration, or improper or inadequate maintenance

and care.

Leitch makes no other warranties, express or implied, of

merchantability, fitness for a particular purpose, or otherwise.

Leitch’s liability for any cause, including breach of contract,

breach of warranty, or negligence, with respect to products sold by

it, is limited to repair or replacement by Leitch, at its sole

discretion. This remedy is exclusive.

In no event shall Leitch be liable for any direct, indirect, special,

incidental or consequential damages, including loss of profits,

irrespective of whether Leitch has advance notice of the possibility

of such damages.

Содержание 880 Series































































































Результаты поиска

Содержание 880 Series

Отзывы:

Похожие инструкции для 880 Series

Бренды по названию

Популярные бренды

Leitch 880 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 880 Series

Отзывы:

Похожие инструкции для 880 Series

Бренды по названию

Популярные бренды