Leisure bay spas P1Series, Руководство пользователя, Страница: 17 / 26

Additional Features for P1, P2
Spa Heating Modes
The Heating Mode offers the ability to control your heater in special circumstances. Your spa is preset at the factory to
Standard Mode . However, the Heating Mode can be changed to Economy or Sleep by pressing the then
button. With each press of the buttons, the display will cycle through the three different modes described below:
1. Standard Mode ( ST ): Your spa is preset to this mode. This mode operates the heater whenever needed to maintain
the programmed spa water temperature. (See
Temperature Adjustment ).
2. Economy Mode (
EC
): This mode operates the heater only during programmed Heating Cycles (See “Setting Heating
Cycles” below). This mode is ideal for areas that charge a premium for electricity during peak
hours. This mode will maintain the thermostat setting. If it does not reach the thermostat
setting, you may have to allow for more heating time by increasing the
Heating Cycles .
3. Sleep Mode ( SL ): This mode works in the same manner as the Economy Mode except the thermostat setting is
automatically lowered by 20 degrees. This mode is best suited for extended leaves from home
when it is not important to maintain constant water temperature, such as vacations or business
trips.
Summer Set Temperature
In hot weather, it is possible for water temperature to exceed the temperature setting. This is especially common when
your temperature setting is lower than air temperature. If the water temperature exceeds the temperature setting more
than 3°, an automatic safety circuit will turn off all of the electrical systems. The systems will remain off until either the water
temperature cools to below the setting, or the setting is increased above the water temperature.
15