Leisure bay spas P1Series, Руководство пользователя, Страница: 10 / 26

ELECTRICAL DATA FOR THE USE OF CERTIFIED LICENSED ELECTRICIAN
WARNING: Shock Hazard! Under No Circumstances Should This Spa Be Installed By Anyone
Other Than A Certified Licensed Electrician!
All wiring MUST be in accordance with the National Electrical Code and all local codes.
W A R N I N G : U S E C O P P E R C O N D U C T O R S O N LY !
P1 SERIES 120-240 VOLT HARD WIRE CONVERSION
Conversion of the P1 Series Equipment
The conversion of an P1 equipment package from a factory installed 120 volt system to a hardwired 240 volt system must be completed by a certified
licensed electrician.
A G.F.C.I. AND A DISCONNECT SWITCH ARE REQUIRED
The National Electrical Code requires that spas connected to 240 volts circuits be equipped with a “G.F.C.I.” and Disconnect Switch. See National
Electric Code Articles 680-12 and 680-42.
LEISURE BAY’S P1 SERIES SPAS ARE NOT EQUIPPED WITH A 240V G.F.C.I. OR A DISCONNECT SWITCH. A G.F.C.I.
SHOULD BE INSTALLED BY A CERTIFIED LICENSED ELECTRICIAN
OUTDOOR LOAD CENTER
The addition of an outdoor load center such as a Siemens W0408ML 1125 or equal must be added to the circuit. This type of load center provides both
a G.F.C.I. and Disconnect Switch in a convenient configuration as required by the National Electric Code.
( See page 9 for suggested wiring configuration)
ISOLATED, DEDICATED 240 VOLT, 30 OR 50 AMP CIRCUITS ARE REQUIRED
An isolated, dedicated 240 volt, 30 or 50 amp circuit is required to provide the power necessary to properly operate the 240V equipment package.
PERMANENTLY HARD WIRED
All 240 volt operations wiring must be permanently hard wired, installed in grounded conduit and installed in compliance with the National Electrical
Code and all local codes.
WIRE SIZING MUST MEET ELECTRICAL CODES
All installations are different. Wire sizing must meet the National Electrical Code and all local code specifications.
See pages 10 & 11 for more conversion details.
8