Danger to life!
Danger to life when opening up the tool, as live compo-
nents and connections are exposed. Before opening the
tool, unplug from the mains supply. Electrically conducting
material (e.g. PE-EL) must not be welded.
Fire and explosion hazard
with incorrect use of the hand
extruder (e.g. overheating of the material), especially near
combustible materials and explosive gases.
The tool must be operated under supervision. Heat can
reach combustible materials, which are out of sight.
For personal protection on building sites we
strongly
recommend
the tool to be connected to a RCCB (Resi-
dual Current Circuit Breaker).
The
voltage rating
stated on the name plate of the tool
must correspond to the mains voltage.
Danger of getting burned!
Do not touch exposed metal
parts and escaping plastizised material. Do not point the
hot air flow and escaping plastizised material in the
direction of people or animals.
Protect
tool from
dampness and wet.
FI
120
230
WARNING
CAUTION
Connect the tool to a
mains socket with protective earth.
Every interruption of the protective earth inside or outside
of the tool is dangerous!
Only use extension cables with protective earth!
‡
2