Leister VULCAN SYSTEM, Руководство по эксплуатации

Страница: 107 / 112

1/1
Leister Technologies AG | Galileo-Strasse 10 | 6056 Kägiswil | Switzerland
phone: +41 41 662 74 74 | leister@leister.com | www.leister.com | www.weldy.com
PLASTIC WELDING PRODUCTS | INDUSTRIAL HEATING & LASER SYSTEMS
Company
Titel
First Last Name
Address
City, St. Zip
Your Ref.
Our Ref. First Last Name
Phone direct +41 (41) 662
Fax direct +41 (41)
E-mail @leister.com
Date
Subject
Best regards
Leister Technologies
First Last Name
Title
Declaration of incorporation
(in terms of the EC machinery directive 2006/42/EC; Appendix II B)
Leister Technologies AG
Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland
hereby declares the partly completed machinery
Designation Hot Air Blower
Type VULCAN
Option SYSTEM
- as far as it is possible from the scope of supply – fulfills the applicable essential
requirements of the EC machinery directive (2006/42/EC).
The partly completed machinery furthermore complies with the provisions of the following
EC directive(s):
EC directive(s) 2014/30/EU (EMC Directive)
2014/35/EU (Low Voltage Directive)
2011/65/EU (RoHS Directive)
Harmonised standards EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3,
EN 61000-3-12, EN 61000-3-11 (Z
max
),
EN 62233, EN 60335-2-45, EN 50581
In addition, we declare the relevant technical documentation for this partly completed
machinery is compiled in accordance with Annex VII (part B) and will be electronically
transmitted to national authorities in response to a reasoned request.
Authorised documentation representative: Volker Pohl, Manager Product Conformity
The partly completed machine must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the EC
machinery directive (2006/42/EC), where appropriate.
Kaegiswil, 29.10.2018
………………………………… …………………………………
Bruno von Wyl Christoph Baumgartner
(Chief Technical Officer) (General Manager)
Thomas Schäfer, Manager Product Conformity
EN ISO 12100, EN 55014-1, EN 55014-2, EN 61000-6-2,
06.05.2019