26
1. Work mode
1.2 Work display
• Pressing the e-Drive starts the heating and blower, and the
Setpoint display changes to the Work display.
• When the
welding nozzle (9)
is heating up, this is indicated on
the
display (5)
with progress bar and arrow (up) together with
the actual value of the welding temperature (flashing).
• If the mains voltage is outside (+/- 15%) the specified nominal
voltage (200 V, 230 V, 400 V), this is displayed flashing with the
symbol and the measured undervoltage/overvoltage.
If the air volume is less than 100 %, the percentage indication
changes with the symbol.
The welding result can be affected, depending on the undervoltage/
overvoltage.
• If no button is pressed after a definite time
(welding nozzle (9)
NOT in welding position)
, the Standby menu is displayed (section
1.9, Standby).
• If the welding nozzle is not swivelled in, the menus Cool Down (section 1.8, Cooling down) or Profiles
(section 1.7, Selecting profiles) can be selected by turning the e-Drive .
• If the
welding nozzle (9)
is swivelled in, the two menu items disappear on the
display (5)
and can no longer be selected.
• If the
welding nozzle (9)
is cooling down, this is indicated with filled out progress bar and arrow
(down) as well as flashing actual value of the welding temperature on the
display (5)
.
