Leister TRIAC S, Руководство пользователя, Страница: 7 / 36

7
Translation of the Original User Manual
Please read operating instructions carefully before use
and keep for future reference.
Warning
DANGER! Danger when opening up the tool, as live components
and connections are exposed. Therefore, before opening it,
unplug the tool to ensure disconnection from the mains. Before
putting into operation, check power supply cord and connector
as well as extension cable for electrical and mechanical damage.
Incorrect use of the hand extruder (eg overheating of the material) can
present a
fi re and explosion hazard , especially near combus t ible
materials and explosive gases.
Do not touch the element housing, air nozzle and discharging
plastizised material when they are hot as they can cause
burns .
Let the tool cool down. Do not point the hot air flow and the
discharg ing plastizised material in the direction of people or animals.
Caution
The voltage rating stated on the tool must correspond to the mains
voltage.
For personal protection on building sites we strongly recommend
the tool be connected to a RCCB ( R esidual C urrent C ircuit B reaker).
The tool must be operated under supervision. Heat can ignite
fl ammable materials which are not in view.The machine may only be
used by
qualifi ed specialists or under their supervision. Children
are not authorized to use this machine.
Protect tool from damp and wet .
Repairs should only be carried out by authorized Leister service
points . Restricted to use with original Leister accessories and
replacement parts . The motor of the fan automatically switches off
when the carbon brushes reach the minimum length.
Warranty
• For this tool, we generally provide a warranty in accordance with the statutory/
country-specifi c regulations from the date of purchase (verifi ed by invoice or
delivery document). Damage that has occurred will be corrected by replacement
or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded
from the warranty.
• Warranty claims will be rejected for tools that have been altered or changed by
the purchaser.
Conformity
Disposal
Power tools, accessories and packaging should be sorted for environmen
tal-friendly recycling. Only for EC countries : Do not dispose of power
tools into household waste! According to the European Directive 2002/96/
EC on waste electrical and electronic equipment and its incorporation into national law,
power tools that are no longer suitable for use must be separately collected and sent
for recovery in an environmental-friendly manner.
Leister Technologies AG, Galileo-Strasse 10, 6056 Kaegiswil/Switzerland,
confi rms that this product, in the version as brought into circulation through us,
fulfi ls the requirements of the following EC directives.
Directives:
2006/42, 2004/108, 2006/95, 2011/65
Harmonized Standards: EN 12100-1, EN 12100-2, EN 14121-1,
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3, EN 62233,
EN 60335-2-45, EN 50581
Kaegiswil, 06.11.2013
Bruno von Wyl, CTO Beat Mettler, COO
Deutsch
English
Français
Español
Português
Italiano
Nederland
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
Polski
Magyar
Česky
Slovensky
Românã
Slovensko
Български
Eesti
Lietuviu
Latviešu
Русский
日本語
中文
ﻲﺑﺮﻋ
Deutsch
English
Français
Español
Português
Italiano
Nederland
Dansk
Svenska
Norsk
Suomi
Eλληνικά
Türkçe
Polski
Magyar
Cesky
Slovensky
Românã
Slovensko
Български
Eesti
ﻲﺑﺮﻋ