16
8
7.7 Feet
Turn the
feet (8)
downward
equally
in order to
position the machine securely on the ground.
Ensure that the machine is suitably and securely
positioned before it is commissioned. Use a spirit
level to align the machine.
Then lock the threaded rods against the machine
frame using the lock nuts.
7.8 Pedal Unit
7A
7B
7
Danger:
Take care not to confuse
the two
pedals (7A + 7B)
of the
pedal unit (7)
. This may result in
burns to the hands when position-
ing the material or if welding is started inadver-
tently. Line yourself up with the separating wall
between the two
pedals (7A + 7B)
.
Using the
left-hand
pedal (7A)
, you can lift the
upper wheel in order to clamp or remove the ma-
terial. If the pedal is pressed during the welding
process, the hot wedge swivels out and welding
is stopped. You can start the welding process by
pressing the
right-hand
pedal (7B)
once (hot
wedge swivels in and the wheels then start turn-
ing). The basic speed is set in advance via the
min speed
parameter. Once the process has
started, the welding speed can be adjusted step-
lessly with
pedal 7B
. The maximum speed is set
using the
max speed
parameter.
Pedal side
Symbol
Function prior to welding
process
Function during welding
process
Left-hand pedal (7A)
Press and hold
Upper welding wheel lifts up.
Press once
Wedge swivels out
Press and hold
Welding process ends and
the upper welding wheel lifts
up.
Right-hand pedal
(7B)
Press once
Wedge swivels in, welding
starts at basic speed
Press down
The welding speed gets fast-
er or slower (stepless adjust-
ment) depending on the posi-
tion of the pedal.
