Leister HOTWIND PREMIUM Скачать руководство пользователя страница 23

Страница: 23 / 136

• The device may only be installed by trained personnel.
• For installation dimensions, see page 3, dimensions/size.

Prior to installation of the device, switch off the unit by the

main switch (2)

and allow the device

to cool down. Machine switches off automatically.

Disconnect

power supply cord (1)

form the line/mains.

• It must be ensured that the connection lines do not come into contact with the heating element tube and are not

exposed to the hot air jet.

• The device must be fastened with three M5 screws to the thread inserts.
• The installation must ensure that

– only cold air is supplied
– no excess (heat) residue builds up
– the device is not subject to jets of hot air from another device.

• If the air contains dust use a Leister stainless steel filter (see accessories) and push it on the

air inlet flange (6)

• In the case of particularly critical dusts (e.g. metal, electrically conductive or damp dusts), special filters must be

used to avoid short-circuits in the device.

• Protect the device from mechanical vibrations and shocks.

Installation

Operation

• Mount corresponding nozzle or reflector, if required.

It must be ensured that the hot air can flow out freely, as otherwise the device can be damaged by the
excess heat building up (risk of fire !).

Connect

power supply cord (1)

to the electrical mains. The nominal voltage indicated on the device

must correspond to the mains voltage.

• Switch on

main switch (2)

After heating mode, switch off the unit by the

main switch (2)

and allow the device to cool down.

Machine switches off automatically.

Disconnect

power supply cord (1)

form the line/mains.

•

WARNING

: When using as a built-in unit, a suitable device for full disconnection from the mains with a contact

distance of 3 mm must be provided in the mains connection.

120
230

Danger – can cause burns !

Do not touch the heating element tube and nozzle while they are hot.

Switch off the

main switch (2)

and allow the unit to cool down before replacing the nozzle or

reflector.
Machine switches off automatically.

Changing the nozzle or reflector

Содержание HOTWIND PREMIUM









































































































































Результаты поиска

Содержание HOTWIND PREMIUM

Отзывы:

Бренды по названию

Популярные бренды

Leister HOTWIND PREMIUM, Руководство по эксплуатации

Результаты поиска

Содержание HOTWIND PREMIUM

Отзывы:

Бренды по названию

Популярные бренды