28
B975 User Guide
Chapter 5
Routing Box Joints
5-9
Socket and pin boards may
differ in thickness. Always use
the mating pin or socket board to
determine depth of cut. Hold it flush
under the template and mark a line
on the board, indicating depth of
cut.
5-7
Routing a Test Fit Joint
Test joints are always routed with the
eBush set at the 5 position.
Retighten the eBush nut after each
guide bushing adjustment.
5-8
Clamp one of the test boards
in the vice. Using the 3/4" side of
the jig, position the left end of the
jig over the test board and clamp in
place.
Board alignment is not important
when routing a test fit.
