Leica Virtual Wrench mojoRTK, Инструкция по эксплуатации

Страница: 2 / 10

For more information:
www.mojoRTK.com
Page
2
/
10
Document #1022 rev1.8
The base position is stored on the mojoRTK console with each wayline and
this is used to filter which waylines are available for recall. If the current
base position is not the same as the associated base position for a desired
wayline then the wayline will not be available. The base position for the
desired wayline can be backed up from the console and loaded into the
base station.
If Network RTK is being used then the user must ensure that the data
stream (mount point) is the same each time. Different data streams may
give different results.
The mojo is able to store up to 100
waylines Each wayline is associated
to a Base position, or, is free to use.
The mojo stores all of the base
positions and waylines but will
only show the waylines for the
current Base position.
Base Station Wayline
position 1 Wayline 1
Wayline 2
position 2 Wayline 3
Network RTK Wayline 4
position 3 Wayline 5
Required Items
„
Unlock codes are required for each of the following features:
ƒ
Wayline storage
ƒ
Pivot guidance
ƒ
Contour guidance
ƒ
Network RTK (see - HOWTO Guide Network RTK)
The unlock code can only be generated by Leica Geosystems if the console
serial number has been provided.
„
Value added resellers can obtain unlock codes directly from Leica.