Leica TM30 Series, Справочное руководство

Страница: 197 / 207

GeoCOM Reference Manual Return-Code names and return-code values
Leica TPS1200 – Version 1.50 197
GRC_ATA_HZ_STRANGE_L 529 0x211 Strange light in Hz-direction.
GRC_ATA_V_STRANGE_L 530 0x212 Strange light in V-direction.
GRC_ATA_SLDR_TRANSFER_PENDING 531 0x213 On multiple ATA_SLDR_OpenTransfer.
GRC_ATA_SLDR_TRANSFER_ILLEGAL 532 0x214 No ATA_SLDR_OpenTransfer happened.
GRC_ATA_SLDR_DATA_ERROR 533 0x215 Unexpected data format received.
GRC_ATA_SLDR_CHK_SUM_ERROR 534 0x216 Checksum error in transmitted data.
GRC_ATA_SLDR_ADDRESS_ERROR 535 0x217 Address out of valid range.
GRC_ATA_SLDR_INV_LOADFILE 536 0x218 Firmware file has invalid format.
GRC_ATA_SLDR_UNSUPPORTED 537 0x219 Current (loaded) firmware doesn't support
upload.
GRC_ATA_PS_NOT_READY 538 0x21A PS-System is not ready.
GRC_ATA_ATR_SYSTEM_ERR 539 0x21B ATR system error
EDM 768 0x300
RetCodeName Value HexVal Description
GRC_EDM_SYSTEM_ERR 769 0x301 Fatal EDM sensor error. See for the exact
reason the original EDM sensor error number.
In the most cases a service problem.
GRC_EDM_INVALID_COMMAND 770 0x302 Invalid command or unknown command, see
command syntax.
GRC_EDM_BOOM_ERR 771 0x303 Boomerang error.
GRC_EDM_SIGN_LOW_ERR 772 0x304 Received signal to low, prism to far away, or
natural barrier, bad environment, etc.
GRC_EDM_DIL_ERR 773 0x305 obsolete
GRC_EDM_SIGN_HIGH_ERR 774 0x306 Received signal to strong, prism to near,
stranger light effect.
GRC_EDM_TIMEOUT 775 0x307 Timeout, measuring time exceeded (signal too
weak, beam interrupted,..)
GRC_EDM_FLUKT_ERR 776 0x308 to much turbulences or distractions
GRC_EDM_FMOT_ERR 777 0x309 filter motor defective
GRC_EDM_DEV_NOT_INSTALLED 778 0x30A Device like EGL, DL is not installed.
GRC_EDM_NOT_FOUND 779 0x30B Search result invalid. For the exact explanation,
see in the description of the called function.
GRC_EDM_ERROR_RECEIVED 780 0x30C Communication ok, but an error reported from
the EDM sensor.
GRC_EDM_MISSING_SRVPWD 781 0x30D No service password is set.
GRC_EDM_INVALID_ANSWER 782 0x30E Communication ok, but an unexpected answer
received.
GRC_EDM_SEND_ERR 783 0x30F Data send error, sending buffer is full.
GRC_EDM_RECEIVE_ERR 784 0x310 Data receive error, like parity buffer overflow.
GRC_EDM_INTERNAL_ERR 785 0x311 Internal EDM subsystem error.
GRC_EDM_BUSY 786 0x312 Sensor is working already, abort current
measuring first.
GRC_EDM_NO_MEASACTIVITY 787 0x313 No measurement activity started.
GRC_EDM_CHKSUM_ERR 788 0x314 Calculated checksum, resp. received data
wrong (only in binary communication mode
possible).
GRC_EDM_INIT_OR_STOP_ERR 789 0x315 During start up or shut down phase an error
occured. It is saved in the DEL buffer.
GRC_EDM_SRL_NOT_AVAILABLE 790 0x316 Red laser not available on this sensor HW.
GRC_EDM_MEAS_ABORTED 791 0x317 Measurement will be aborted (will be used for
the laser security)
GRC_EDM_SLDR_TRANSFER_PENDING 798 0x31E Multiple OpenTransfer calls.
GRC_EDM_SLDR_TRANSFER_ILLEGAL 799 0x31F No open transfer happened.
GRC_EDM_SLDR_DATA_ERROR 800 0x320 Unexpected data format received.
GRC_EDM_SLDR_CHK_SUM_ERROR 801 0x321 Checksum error in transmitted data.
GRC_EDM_SLDR_ADDR_ERROR 802 0x322 Address out of valid range.
GRC_EDM_SLDR_INV_LOADFILE 803 0x323 Firmware file has invalid format.