Leica TM30 Series, Справочное руководство

Страница: 196 / 207

GeoCOM Reference Manual Return-Code names and return-code values
Leica TPS1200 – Version 1.50 196
GRC_ANG_BAD_INCLIN_ACC 261 0x105 inclination accuracies not reached
GRC_ANG_WRITE_PROTECTED 266 0x10A no write access allowed
GRC_ANG_OUT_OF_RANGE 267 0x10B value out of range
GRC_ANG_IR_OCCURED 268 0x10C function aborted due to interrupt
GRC_ANG_HZ_MOVED 269 0x10D hz moved during incline measurement
GRC_ANG_OS_ERROR 270 0x10E troubles with operation system
GRC_ANG_DATA_ERROR 271 0x10F overflow at parameter values
GRC_ANG_PEAK_CNT_UFL 272 0x110 too less peaks
GRC_ANG_TIME_OUT 273 0x111 reading timeout
GRC_ANG_TOO_MANY_EXPOS 274 0x112 too many exposures wanted
GRC_ANG_PIX_CTRL_ERR 275 0x113 picture height out of range
GRC_ANG_MAX_POS_SKIP 276 0x114 positive exposure dynamic overflow
GRC_ANG_MAX_NEG_SKIP 277 0x115 negative exposure dynamic overflow
GRC_ANG_EXP_LIMIT 278 0x116 exposure time overflow
GRC_ANG_UNDER_EXPOSURE 279 0x117 picture underexposured
GRC_ANG_OVER_EXPOSURE 280 0x118 picture overexposured
GRC_ANG_TMANY_PEAKS 300 0x12C too many peaks detected
GRC_ANG_TLESS_PEAKS 301 0x12D too less peaks detected
GRC_ANG_PEAK_TOO_SLIM 302 0x12E peak too slim
GRC_ANG_PEAK_TOO_WIDE 303 0x12F peak to wide
GRC_ANG_BAD_PEAKDIFF 304 0x130 bad peak difference
GRC_ANG_UNDER_EXP_PICT 305 0x131 too less peak amplitude
GRC_ANG_PEAKS_INHOMOGEN 306 0x132 inhomogeneous peak amplitudes
GRC_ANG_NO_DECOD_POSS 307 0x133 no peak decoding possible
GRC_ANG_UNSTABLE_DECOD 308 0x134 peak decoding not stable
GRC_ANG_TLESS_FPEAKS 309 0x135 too less valid finepeaks
GRC_ANG_INCL_OLD_PLANE 316 0x13C inclination plane out of time range
GRC_ANG_INCL_NO_PLANE 317 0x13D inclination no plane available
GRC_ANG_FAST_ANG_ERR 326 0x146 errors in 5kHz and or 2.5kHz angle
GRC_ANG_FAST_ANG_ERR_5 327 0x147 errors in 5kHz angle
GRC_ANG_FAST_ANG_ERR_25 328 0x148 errors in 2.5kHz angle
GRC_ANG_TRANS_ERR 329 0x149 LVDS transfer error detected
GRC_ANG_TRANS_ERR_5 330 0x14A LVDS transfer error detected in 5kHz mode
GRC_ANG_TRANS_ERR_25 331 0x14B LVDS transfer error detected in 2.5kHz mode
ATA 512 0x200
RetCodeName Value HexVal Description
GRC_ATA_NOT_READY 512 0x200 ATR-System is not ready.
GRC_ATA_NO_RESULT 513 0x201 Result isn't available yet.
GRC_ATA_SEVERAL_TARGETS 514 0x202 Several Targets detected.
GRC_ATA_BIG_SPOT 515 0x203 Spot is too big for analyse.
GRC_ATA_BACKGROUND 516 0x204 Background is too bright.
GRC_ATA_NO_TARGETS 517 0x205 No targets detected.
GRC_ATA_NOT_ACCURAT 518 0x206 Accuracy worse than asked for.
GRC_ATA_SPOT_ON_EDGE 519 0x207 Spot is on the edge of the sensing area.
GRC_ATA_BLOOMING 522 0x20A Blooming or spot on edge detected.
GRC_ATA_NOT_BUSY 523 0x20B ATR isn't in a continuous mode.
GRC_ATA_STRANGE_LIGHT 524 0x20C Not the spot of the own target illuminator.
GRC_ATA_V24_FAIL 525 0x20D Communication error to sensor (ATR).
GRC_ATA_DECODE_ERROR 526 0x20E Received Arguments cannot be decoded
GRC_ATA_HZ_FAIL 527 0x20F No Spot detected in Hz-direction.
GRC_ATA_V_FAIL 528 0x210 No Spot detected in V-direction.