22
Instructions for Use V1.2, RevE – 08/2016
4.
Instrument Setup
Marking 1
Installing the rinsing water containers
(continued)
Marking 2
Side surface of the connector
End of the connector
• Now take the rinsing water
container and the hose out
of the stainer.
• Align marking 1 to the end of
the connector and make a
second marking ("Marking 2")
to indicate the lateral surface
of the connector (
Fig. 25
).
• Cut the hose off at Marking 2.
• Then push the hose (
21
) fully
onto the connector by twist-
ing until the end of the hose is
flush against the side surface
of the connector (
Fig. 26
).
• If the hose is not pushed com
-
pletely onto the connector,
it may become detached as
soon as the water supply is
turned on.
Fig. 25
Fig. 26
Marking 2
21
Do not stretch tub-
ing to fit on the fit-
ting.
