Leica SL2-S, Инструкция по эксплуатации

Страница: 6 / 39

EN
6
PREPARATION
▸ Fully charge and insert the rechargeable battery
▸ The second SD memory card (where applicable) must be
removed from the camera
▸ Remove any stored firmware files from the memory card
• We recommend saving any recordings on the memory card
and reformatting it before the update.
(Caution: Loss of data! All data stored on the memory card
will be lost during formatting.)
▸ Download the latest firmware version
▸ Save the download to the memory card
• Store the firmware file in the main directory of the memory
card (not in a sub-directory).
▸ Insert the memory card into the camera
▸ Switch the camera on
UPDATING THE CAMERA FIRMWARE
▸ Carry out preparations
▸ Select
Camera Information Camera Information
in the main menu
▸ Select
Camera Firmware Version Camera Firmware Version
▸ Select
Start Update Start Update
• A prompt with information about the update is displayed.
▸ Check the version information
▸ Select
Yes Yes
• The prompt
Save profiles on SD Card? Save profiles on SD Card?
appears.
▸ Select
Yes Yes
/
No No
• The update will start automatically.
• The lower status LED will flash during this process.
• Once the process has completed successfully, a relevant
on-screen message and prompt to restart the device will
appear on screen.
▸ Switch the camera off and on again
Note
• Date & time, as well as the preferred language will have to be
set up again after the restart. Relevant prompts will appear on
screen.