Leica SL2-S, Инструкция по эксплуатации, Страница: 20 / 39

EN
20
FOLLOW FOCUS
This function facilitates automatic transitions to specified focus
settings (focus positions). Up to three such focus positions can be
pre-configured and optionally be set up with a delay time. When a
focus position is accessed, the camera will automatically focus on
the set distance. The transition will then be achieved smoothly and
with a configurable speed. That way, soft, almost unnoticeable
transitions are created. Prerequisite is that the relevant distances
are known beforehand.
The specified focus positions can be accessed individually or in an
automated sequence.
▸ Select
Focusing Focusing
in the main menu
▸ Select
Focus Mode Focus Mode
▸ Select
Follow Focus Follow Focus
▸ Select
Focus Position Focus Position
• “Follow Focus” is activated. The Follow Focus menu appears.
• The Follow Focus menu remains visible until the function is
exited.
FUNCTION BEHAVIOR
The function continues to run regardless of whether the camera is
currently recording. All operating procedures described in the
following can therefore also occur while actively recording. It is
also possible to start and stop a recording during an active focus
sequence, or to exit the Follow Focus menu while recording.
Notes
• The following limitations apply while the function is active:
– Focus ring and autofocus are deactivated.
– The FN buttons are locked.
– EVF is unavailable.
•
Follow Focus Follow Focus
is not available under the following conditions:
– Recordings in slow motion
– When using a lens adapter
– When using MF lenses
– When using lenses with AF/MF switch if the MF setting is
selected