Leica RANGEMASTER CRF 1600-B, Инструкция по эксплуатации

Страница: 37 / 186

35
4. Press the main button several times to select the
relevant ballistic curve, i.e.
- EU1 to EU12 or
- US1 to US12 , or
if you want the range to be displayed without the impact
point correction (
AbC ) (see p. 36).
- OFF .
5. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to the
zeroing range setting (
SId
) and then disappears
If a ballistic curve is set, after each range measurement
the range value is first displayed for 2s, then the
calculated correction value for 6s.
SeTTing The zerOing range (
SId
)
Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just specified the
ballistic curve and
Sld
is still flashing in the display.
1. Press and hold the secondary button (1) (
≥
3s).
• The display shows USEU .
2. Press the secondary button briefly (<2s) twice.
• The display changes to bALL and then to SId.
3. Press the main button (2) several times to select the
required zeroing range.
- 100 [m],
- 200 [m], or
-
GEE
[m], or
-
100
[y], or
-
200
[y], or
-
300
[y].
4. Save your setting by briefly pressing the secondary
button.
• The saved setting is lit continuously for 4s as
confirmation, then the display changes first to
AbC
and then disappears.