Leica mojo 3D, Руководство пользователя, Страница: 157 / 378

Leica mojo3D, Automatic Section Control 157
7.4 Section Override Control
Section override
control, step-by-
step To override the automatic section control, carry out the following steps:
1. With the master on and coverage being recorded, tap anywhere on the horizontal
section control bar at the bottom of the screen.
2. Tap a section on the section
control override bar, or tap or
to select a section to override.
3. Tap Auto , On or Off to set the override state.
• On : The section will apply coverage when the master record button is on
(blue), even when travelling over an area already covered.
• Off : The section is turned off, and will not apply coverage.
• Auto : Auto section control will operate as normal.
4. Or, change all the settings at once by tapping All Auto , All On , or All Off .
5. Tap to close the section override control.