iCON robot 60/iCON builder 60, TPS Specific Functionality within iCON site/iCON build
48
6.3
Atack
Description
Atack
is an application to adjust the four tracks of a concrete paver dynamically relative
to the body of the machine. A wizard guides through the process requiring some user
interaction.
Adjusting tracks
step-by-step
Step
Description
1.
Select
from the
Machine Control Tools
Toolbox to start the wizard.
2.
Select an option.
PRI/SEC
Aim to
PRI
mary prism and measure.
Then aim to
SEC
ondary prism and
measure.
Parallel
Aim to first point at the side of the
machine and measure.
Then aim to second point at the side
of the machine and measure.
Perpendicular
Aim to first point at the rear of the
machine and measure.
Then aim to second point at the rear
of the machine and measure.
3.
Follow the instructions on the screen.
Then tap the next Wizard step
to proceed.
4.
Tap on all tracks you want to measure.
To select all tracks at once, tap on the grey square in the middle.
The colours of the track symbols indicate:
• Blue = Track selected
• Grey = Track not selected
Then tap the next Wizard step
to proceed.
